|
|
Build Your Online Product Catalogs?
Specifications
1 Constuction is Single row, single layer, Reinforcement
2. 7 Sections (Length: 21.33m,Width:4.2m)
Application of the co***ct standard 200 panel bridge:
Single lane: Bridge deck width: 4.2m. ***n length: 9.14-76.2m
Double lanes: Bridge deck width: 7.4m. ***n length: 9.14-57.9m
The co***ct 200 panel bridge: The co***ct 200 panel bridge is similar to the co***ct 100 panel bridge from their appearance. The difference is its increased panel height to 2.134m. It employed the method of alternating joints between Reinforcement Chords and the joints between panels. This method can decrease inelastic deformation caused by the oversized pinholes. Pre-arch method is used to additionally cut down mid-***n and vertical deflection to a larger degree. Bolt-connected components use the orienting sleeve- fixing method to increase accuracy of connections. Shear is created in orienting sleeves and tension is developed in bolts, which increase the usage life of the bolts and ensure the safety of panel bridges. Wind resistant brace is made to be composite type and is connected to transom/girders to improve overall stability of panel bridges.
The part between braced frame and panels is fixed through bridging so as to prevent the whole bridge from side bending. After the erection, there will be a pre-arched degree over the ***n of the bridge. Besides it can be assembled into single-lane bridges. The co***ct 200 panel bridge can also be assembled into double lane bridge, hence it broadens its application range. It is suitable for the load designs of HS-15, HS-20, HS-25 and pedrail-50 etc. |
| Company: |
Jiangsu zhongye traffic engineering co.,ltd
|
| Contact: |
Ms. Iris shen |
| Address: |
jingkou ind.zone |
| Postcode: |
|
| Tel: |
13655280991 |
| Fax: |
051185585215 |
| E-mail: |
|
|
|
|
Home
